A great and creative activity!
You will need:
– a teaspoon
– a big enamel or cast iron pot
– a thermometer
– white, cream or light colored wool yarn
– citric acid
STEP ONE: Wash yarn. Follow washing instructions on yarn.
STEP TWO: Fill large enamel or stainless steel pot with warm water, you want it about 100 degrees. Tap water should be sufficient. Add yarn and soak for fifteen minutes.
STEP THREE: Dissolve between 1/4 – 1/2 tsp (depending on how intense you want the color) dye in a small paper cup with warm water, and add dissolved dye to yarn bath. Stir to incorporate, and soak for ten minutes.
STEP FOUR: Slowly raise temperature to 175 degrees F, and soak at consistent 175 for ten minutes.
STEP FIVE: Add one teaspoon of citric acid and stir to dissolve. Slowly raise temperature and stir until water is cleared. If water is not cleared in a few minutes add another teaspoon of citric acid. If the water is almost clear, by the time the water is cool, it should be clear.
STEP FIVE: Once water is clear, remove pot from heat immediately. Let cool, then rinse with cold water and let the yarn dry.
CONGRATS! You have now dyed yarn!
(This last picture was dyed one solid color following these instructions, and then it was repeated again on half of the yarn sing a darker color. It produces a long striping pattern.)
Photos © Natalie Gonzalez